1.

Controls two air conditioners.

2.

Separate Phase Supply for each A/C.

3.

Bright Red 4 Digit LED Display.

4.

Accurate Temperature sensing by precise temperature sensor.

5.

Time Sharing for Compressors to share load equally.

6.

Voltage & Current protections for each compressor.

7.

Separate alarm relay contacts for AC Fail.

8.

Fire protection by Digital Input

9.

Hour counters for Compressor ON Period to check its reliability.

10.

Display of all the A/C parameters & fault messages continuously in a scrolling manner.

11.

Display Hold Feature by using ENTER Key. Press it again to release the hold.

12.

Various set points are settable through the following different Menu categories:
A] VIEW
B] SET
C] RESET

13.

Password Protection for all the settings.

14.

Sensor Fail Mode to keep ON&OFF cycle of one of the A/C through sensor fail ON/FF time settings

15.

Auto (with all protections)/ manual (without protection) Modes.

16.

Controller Bypass feature by provision of Switch on Front Panel.

17.